Where ever water and equipment interact there is going to be some type of hard water problem – guaranteed! There is an inevitable conclusion we’ve come to…
From fouling of cooling towers and clogging of water pipes to scaling of coffee pots, dishwashers, drill heads, ice machines, heater exchangers, washing machines and water heaters. Most companies just build the extra maintenance required to clean the scale off into their schedules and deal with the added expense of the shortened life span of the equipment with a shrug of the shoulders.
But smart maintenance personnel know there must be a better way – and there is!
You see most companies are chasing their tails when it comes to hard water problems because they just deal with the symptoms. The scale build up, the fouling, the rusting, the clogging and the salt build up.
The little known secret to treating hard water problems is quite simple really…
Treat the problem at the source!
What if you could simply change the chemical structure of the hard water before it touches the equipment so that the minerals didn’t precipitate out and crust on surfaces it touches? Then you wouldn’t have to treat the water by adding chemicals or manually chip off the scale or replace the equipment because it’s not doing the job you need it to.
There is no commercial hard water problem that the addition of an Vani Aquatech system can’t improve! No matter what application or equipment you are having problems with. We’ve got the solution!
There is an Vani Aquatech system or a custom manufactured water conditioning unit to meet your specific requirements. If your application is large or small we can make it!
Installing an Vani Aquatech system will result in reduced maintenance costs, allow equipment to work more efficiently and protect your investment in capital equipment – guaranteed!
See the extraordinary yet every day proven results in these Commercial Case Studies.
| Threading/fitting | 1″ BSPP MALE |
|---|---|
| Material | SS304 |
| Flow Rate LPM | 20-35 |
| Drops In PSI* | 2 TO 5 |
| Weight | 0.53 |
Vani Home can be installed in-line on the inlet of the overhead tank. Preferably closer to the water pump to ensure good pressure.
After a year of continual use the surface of the alloy core may be coated with a layer of sediments or contaminants. This could interfere with the expected results and needs to be cleaned. Check out our guidelines on Conditioner Care.
5 Year warranty on manufacturing deficiencies in material and workmanship. Does not cover products that are improperly selected, used, abused, altered or repaired, or incorrectly installed by a business partner or your/their appointed installer. The company has no control over water chemistry and increase/decrease changes to pH, water analysis, corrosiveness, any water chemistry, that may or may not impact the product negatively
This product does not change the TDS or the Hardness in the water. Similar to how a UV purifier nullifies the effects of bacteria in water, this product nullifies the effects of hardness minerals in water. It is a catalytic converter that heavily reduces the Average Particle size and Mineral Charge (Zeta Potential) and converts Calcite to Aragonite (Polymorphs of Calcium Carbonate). Make sure you select the right model based on the FLOWRATE of water being supplied. Improper selection may not lead to a positive outcome. For sediments, turbidity or murkiness in water pre-filtration is recommended. If you have any issues feel free to reach out to us on +91-724-746-5300 or email info@vaniaquatech.com
Only logged in customers who have purchased this product may leave a review.
